Pilot Scale Fermentor 200L

        Features and Benefits:
               1. Integrated controller board is adopted to measure,
                   control and display the fermentation system.
               2. Head-lifting system
               3. Digital PID control algorithm makes fast approach to the
                   arget temperature and maintain vessel temperature stably
               4. Color LCD displays the whole status of the system in
                   graphic mode.
               5. Measured data and control parameters can be not only
                   saved and transmitted to the computer in Excel format
                   but also printed out by thermal printer in real time state
               6. Li-ion battery is used to backup the data in the memory
               7. Very easy to connect with the various systems such as
                   memory stick, printer, computer with the RS-232C
                   communication protocol

         The Fermentor SiDoLim SDS is a large size pilot scale fermentation systems and the top driving mechanism is applied.
   The head plate lifting system by air cylinder and linear motion guide is adapted in standard specification.

         This system can be used for microbial, insect and mammalian cell culturing procedures. The stainless steel (SUS316L)
   vessel and the whole attachments can be sterilized automatically or manually in the pilot scale fermentation system and the
   whole fermentation procedures can be also performed automatically. The integrated control board measures the whole sensor
   values and control the fermentor system based on the measured values. The procedures and monitored data are graphically

   displayed in the 8.5" color LCD screen and all the control parameters can be adjusted in the graphic mode.

          The system is designed with the spirit of mass production process to apply the system in the pilot scale for the test
   production to the mass production in the small scale plant.

Agitation	Drive	DC motor, AC Gear motor, Top drive(mechanical drive)
	Range	50~1000rpm ±1rpm
	Impellers	Turbine impeller(SUS316L) Foam breaker (SUS316L)
	Sensor	Magnetic Hall sensor
	Control	Microprocessor based PID
Materials& Finish	Vessel	Using 316L stainless steel it is polished mechanically and/or electrically
	Piping	316L stainless steel prevent contamination and is polished by electrically
	O-rings/Gaskets	Viton or silicon material is used for the O-ring and the EPDM is used for gasket
Heating Plate		The head lift system is powered by air cylinder and guided by two sets of linear motion fuide. The lifting load capacity can be adjusted and designed for the size of the head plate
Temperature	Range(℃)	From 3^oC above the cooling water temperature to 80^oC (accuracy ±0.1℃)
	Sensor	RTD(Pt-100)
	Control	The temperature is automatically controlled by the built-in heater cartridge
Aeration	Sparger	Ring sparger (SUS 316L)
	Intel Filter	The cartridge type sterilizable pleated type 0.2um absolute filter is applied
	Outer Filter	The same as intel filter specification(option item)
	Control Range	Different vessel size and/or ordered specifications
Pressure Control		The pressure is controlled manually and/or automatically
Control Unit	Panel	8.5＂Graphic Color LCD, Membrane keypad
	Communications	Memory stick, printer, computer with the RS-232C communications protocol
	Controller Board	Microprocessor based integrated controller board is adopted to measure, control and display the fermentation system
Power Supply		220V 50/60Hz, Single phase, 380V 50/60Hz three phase
Data Storage		pH, DO, Pressure, Temperature and Agitation speed

Fermentor Vessel Dimension

Order Number	Total Vol. (Working Vol.)	Inner Dia. (mm)	Inner Height (mm)	Impeller Dia. (mm)	D/P (%)	H: D
Order Number	Total Vol. (Working Vol.)	D	H	P	D/P (%)	H: D
PD100	100L (70L)	385	900	155	40	2.3 :1
PD200	200L (150L)	500	1055	200	40	2.1 :1
PD300	300L (210L)	550	1255	220	40	2.3 :1
PD500	500L (350L)	680	1400	280	40	2 :1
PD700	700L (500L)	750	1600	300	40	2 :1

Product Catalogue:

           Contact us: Sales Director: Andrew Linken    Email: sale@sentinaininc.com
                            Technical Director: Jack F.         Email: tech@sentinaininc.com
                              Service Support: Dacheng Dang Email: service@sentinaininc.com

Without Notification when all products are subjected to technical changes. Please contact us immediately if you want to get more information about the products. We are looking forward to sincere cooperation with you.